Festo SEC-ST-48-6-P01, Fitting And Installation Instructions

Page: 41 / 56

3. Installation
3-10
Festo SEC-ST-48-6-P01-EN en 0111NH
3.3.4 Connecting the SEC-ST to the power supply
1. Make sure that the power supply is switched off.
2. Insert the plug into socket X3 of the SEC-ST.
3. Connect the PE cable of the mains supply to the earth
terminal PE.
3.3.5 Connecting the SEC-ST to the controller (SPC200)
1. Make sure that the power supply is switched off.
2. Insert plug X1 into the socket on the SEC-ST.
3. Connect the earthing strap of the cable to the earth
terminal PE.
4. Insert the 15-pin sub-D plug connector into the stepper
motor control card socket.