SDE1−...
Festo SDE1−... 0511e English
53
MINMAX mode (extreme values)
The minimum and maximum measured pressure values are saved in the SDE1−...
The MINMAX mode displays the lowest and highest pressure values up to the time
of displaying. The minimum/maximum values are lost when the power supply is
switched off.
Displaying minimum/maximum values
S
In order to activate the MINMAX mode, press buttons A and B simultaneously.
The lowest pressure value up to that moment will then be displayed
(min /P.Lo).
S
Press buttons A and B again simultaneously. The maximum pressure value up
to that moment will then be displayed (max /P.Hi).
S
Press buttons A and B again simultaneously. The unit then returns to the
RUNmode.
Resetting the minimum/maximum value memory
S
Hold the A and B buttons pressed down longer than 2 seconds.
[min] [max] flashes.
S
Or switch off the power supply.
Test run
S
Carry out a test run with various pressures to ascertain whether the SDE1−...
switches as desired.
Summary of Contents for SDE1 Series
