Storage station
56
© Festo Didactic 8049748
11.5
Power supply
•
The stations are supplied with electrical power from a power supply unit with an output voltage
of 24 V DC (max. 5 A).
•
The entire station is supplied with electrical power from the rack PLC.
11.6
Loading PLC programs
Proceed as described in the user’s manuals for the utilized programming software in order to load the PLC
programs.
Current PLC programs for various controllers can be found on the Internet at the following website:
www.festo-didactic.com > Services > MPS® The Modular Production System > Stations
11.7
Teaching in the locations of the high-bay racking system
During teach-in, the coordinates of the racking system locations are taught in to the station controller (PLC)
(already set up upon shipment from the factory).
Teach-in is only required:
•
After a collision involving the planar surface gantry
•
After a mechanical component has been moved or replaced
Setting up network access and the teach-in procedure are described below step by step.
Summary of Contents for MPS 8049013
Page 123: ......
