Festo IIFB-02- Series, Manual

Page: 57 / 123

PLEASE NOTE
The following A-B specific functions are not
implemented:
– Last Chassis (cf. p. 5-14)
– Hold Last State
– Processor Restart Lockout
CAUTION
For security applications:
With Festo valve terminals/valve sensor termi-
nals, the functions "Hold Last State" or
"Processor Restart Lockout" must be realized
by using double solenoid valves.
The necessary pre-settings and the connections
to the electronic components are described in
this chapter. The following table summarizes the
procedure (1...4):
1. Switching off
•
Operating voltage.
•
Compressed air supply.
2. Configuring the valve terminal/valve sensor terminal
Opening the RIO node
•
Address selector switch (Setting the rack no. and
starting I/O group).
•
DIL-switch (Setting the RIO baud rate).
Closing the RIO node
3. Connecting the valve terminal/valve sensor terminal
•
General (Connecting sockets).
•
24V operating voltage connection.
•
RIO interface (Connecting the interfaces.)
•
Outputs (Pin assignment).
•
Inputs (Pin assignment and
circuitry).
4. Switching on
•
Operating voltage.
•
Compressed air supply.
VIFB8 – 02 4. Installation
4-22
9706