Festo IIFB-02- Series, Manual

Page: 77 / 123

Outputs of valve locations
The outputs for the valves correspond to the
valve solenoid coils. They can only be used in
the intended form.
In general the following applies:
•
Outputs are not short-circuit protected
•
Two outputs per valve location
•
With unilaterally-operated valves the output
with the even bit number is used. The other
output cannot be used for other purposes.
Additional outputs
There are two additional outputs (O0.00 and
O0.01) on the valve-sensor coupling unit of the
valve sensor terminal. These additional outputs
are transistor outputs with positive logic (PNP
outputs).
PNP outputs
(0,5A/24V)
Fig. 4/27: Additional outputs on valve sensor terminal
VIFB8 – 02 4. Installation
4-42
9706