Festo IIFB-02- Series, Manual

Page: 64 / 123

Connecting the valve terminal/valve sensor terminal
Connecting the cables to the plug/sockets
PLEASE NOTE
If one of the plugs is not used, it should be
sealed with a protective cap (protection class
IP65).
1. Open the plugs/sockets as follows
(see following diagram)
•
Power supply socket:
Insert the power supply socket into the
operating voltage plug on the valve termi-
nal/valve sensor terminal. Unscrew the con-
nection part of the socket. Now remove the
connection part of the socket from the plug.
•
Sensor plug (for electrical inputs/outputs):
Unscrew the centre knurled nut.
•
RIO cable socket (for RIO connection):
Unscrew the centre knurled nut.
VIFB8 – 02 4. Installation
9706
4-29