Festo EXCM-10, Repair Instructions

Page: 12 / 52

12 / 52 Festo 7EXCMc_en
2.4.2 EXCM-30
This illustration provides an overview of the orientation designations for the planar surface gantry EXCM-30.
Festo logo = reference point
O
= top
U = bottom
R = right
L = left
V = front
H = rear
2.5 Type code
The features of a planar surface gantry can be determined with the help of the product labelling on the planar surface
gantry. The Festo logo and the product labelling are attached separately to the planar surface gantry. The product
labelling for both sizes is located on the drive cover. The order code describes the planar surface gantry’s features,
separated by a hyphen “-”.
A list and description of all possible equipment features of the planar surface gantry can be found in the data sheet, It
is available on the Festo website (

www.festo.com ).
2.5.1 EXCM-10
Example:
1801920 C708
ABCDEFG12345
EXCM-10-150-110-GF-ST-B-E1
5
4
1
2
3
1
Order code
2
Part number
3
Serial number
4
Product key
5
Product Key Code
Data Matrix Barcode
(http://pk.festo.com/ + Product Key)
The order code on the product labelling provides the following information:
EXCM Electric planar surface gantry
10
Size, slide load max. 0.5 kg
150 150 mm stroke of the X-axis
110
110 mm stroke of the Y-axis
GF Plain-bearing guide of the X- and Y-axis
ST
Stepper motor with encoder function
B Motor flange mounted downwards
E1
Controller flange mounted on the portal