3 / 52
Festo 7EXCMc_en
Foreword
These repair instructions are valid for the planar surface gantries listed on the
title page to the exclusion of any liability claims.
The descriptions in these repair instructions may deviate depending on the
design and/or modification status of the planar surface gantries. The user
must check this prior to carrying out the repair and take the deviations into
consideration if necessary.
These repair instructions have been prepared with care.
Festo AG & Co. KG does not, however, accept liability for any errors in these
repair instructions or their consequences. Likewise, no liability is accepted for
direct or consequential damage resulting from incorrect use of the products.
Further information is given in
.
The relevant regulations on occupational safety, safety engineering, and
interference suppression as well as the stipulations contained in these repair
instructions must be observed when working on the products.
Summary of Contents for EXCM-10
