Subject to change – 2018/04
82
è
Internet: www.festo.com/catalogue/...
Terminal CPX
Technical data – HART input/output module
General technical data
Diagnostics
Wire break per channel
Limit value violation per channel
Short circuit/overload per channel
Parameterisation error
Overflow/underflow
Limit value violation to NE43 per channel
Parameterisation
Data format
Failsafe per channel
Forcing per channel
Limit monitoring per channel
Idle mode per channel
Measured value smoothing
Signal range per channel
Monitoring of overflow/underflow
Monitoring according to NE43, inputs
Behaviour after short circuit/overload
Monitoring wire break per channel
Number of HART repetitions
Hysteresis for limit values
HART variables (4 pieces)
Degree of protection to EN 60529
Depending on manifold block
Technical data – Mechanical
Type of mounting
On interlinking block
Product weight
[g]
77.4
Grid dimension
[mm]
50
Dimensions (incl. interlinking block and manifold block)
W x L x H
[mm]
50 x 107 x 70
Materials
Housing
PA reinforced, PC
Note on materials
RoHS-compliant
Operating and environmental conditions
Ambient temperature
[°C]
–5 … +50
Storage temperature
[°C]
–20 … +70
Relative humidity
[%]
95, non-condensing
Corrosion resistance class CRC
1)
1 (when installed)
CE marking (see declaration of conformity)
3)
To EU EMC Directive
2)
1)
Corrosion resistance class CRC 1 to Festo standard FN 940070
Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive
trunnions).
2)
For information about the applicability of the component see the manufacturer’s EC declaration of conformity at: www.festo.com/sp
è
Certificates.
If the component is subject to restrictions on usage in residential, office or commercial environments or small businesses, further measures to reduce the emitted interference may be necessary.
3)
Additional information www.festo.com/sp
è
Certificates.
Safety data
Shock resistance
Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 2 to FN 942017-4 and
EN 60068-2-6
-V-
New
