Festo Compact Performance Series, Programming And Diagnosis

Page: 31 / 58

2.1 Preparing the CP system for operation on the
RIO network
2.1.1 Operating voltage
PLEASE NOTE
•
The CP field bus node must have a separate
operating voltage supply.
2.1.2 Saving the line assignment
PLEASE NOTE
Before commissioning the CP system you must
first prepare it for commissioning
(see "CP system" manual).
Before commissioning the CP system on the RIO net-
work proceed as follows:
1. Connect the operating voltage of the node (see "CP
system" manual).
2. Connect the CP modules.
3. Switch on the operating voltage.
4. Save the line assignment by pressing the SAVE
button.
5. Switch off the operating voltage for the node.
2. Commissioning
CP FB8 9809a
2-3