32 / 34
Festo 7ADNc_en
10.2
Special tools
The following special tools are required to repair and service the cylinder with piston rod:
Designation
Used for
Order No. *
Illustration
Slotted screwdriver M4,
(DIN 546)
ADNGF-32/ 40
384354
Slotted screwdriver M5,
(DIN 546)
ADNGF-50 – 100
384355
Centring aid for the cushioning
boss
ADN / ADNGF-32-…-PPS
1356097
ADN / ADNGF-40-…-PPS
1437387
ADN / ADNGF-50-…-PPS
1437415
ADN / ADNGF-63-…-PPS
1437415
ADN / ADNGF-80-…-PPS
1441528
ADN / ADNGF-100-…-PPS
2585245
Tubular box wrench
ADN / ADNGF-32-…-PPS
200 / 08 **
ADN / ADNGF-40-…-PPS
200 / 17 **
ADN / ADNGF-50-…-PPS
200 / 20 **
ADN / ADNGF-63-…-PPS
200 / 20 **
ADN / ADNGF-80-…-PPS
200 / 22 **
ADN / ADNGF-100-…-PPS
200 / 22 **
** Order No. of Bauer & Böcker GmbH & Co. KG
Note
The wall thickness of the tubular box wrench used together with
the size of the wrench are key for ensuring that the installation is
completed without damaging the cushioning boss. With the order
numbers named above you can purchase the appropriate tubular
box wrenches for the respective cylinder from Bauer & Böcker
GmbH & Co. KG (
http://www.boecker-qualitaet.de
).
Mounting sleeve for piston rod
The mounting sleeve for piston rods for pro-
tecting the piston rod seal and the bearing in
the bearing cap while the repair is being car-
ried out must be produced by the customer.
The schematic diagram is included in
the information brochure “
Accessories,
equipment and tools
”.
* Unless specified otherwise, these order numbers apply to orders from Festo.
Documents
Further information on the special tools and schematic diagrams is included in the information brochure
“Accessories,
equipment and tools”
. The brochure can be found in the online spare parts catalogue on the Festo website
(
http://spareparts.festo.com/xdki/data/SPC/0/PDF_SAFE/Hilfsmittel.pdf
).
