23 / 34
Festo 7ADNc_en
12.
Wet the flange screws or socket head screws (ADNGL-80 / 100 / 125 only)
with the locking agent included in the set of wearing parts.
13. Screw in the screws through the bearing and end caps and into the cylinder
barrel.
14.
Align the end bearing and caps flush with the cylinder barrel.
15. Tighten the screws with the appropriate tightening torque (see Table):
Type
Tightening torque
Flange screw
ADN-32, ADNGF-32
27 Nm
ADN-40, ADNGF-40
27 Nm
ADN-50, ADNGF-50
35 Nm
ADN-63, ADNGF-63
35 Nm
Socket head screw
ADN-80, ADNGF-80
8 Nm
ADN-100, ADNGF-100
9 Nm
ADNGF-100-…-P-A
8 Nm
ADN-125
24 Nm
Carry out steps 16 to 20 for ADNGF only
16.
Apply a thin film of grease on the guide rods of the moment compensator.
17. Push the moment compensator together with the guide rods into the guide
bearing of the cylinder.
18. Place the washer (on ADNGF-80 / 100 only) on the socket head screw.
19.
Wet the thread of the socket head screw, which connects the moment
compensator to the piston rod, with the locking agent included in the set of
wearing parts.
20. Tighten the socket head screw with the appropriate tightening torque (see
Table):
Type
Tightening torque
ADNGF-32
10 Nm
ADNGF-40
10 Nm
ADNGF-50
20 Nm
ADNGF-63
20 Nm
ADNGF-80
39 Nm
ADNGF-100
39 Nm