Fesia Grasp, Instructions For Use Manual

Page: 20 / 33

Primitive movements configuration is required for the “Repetitive Task Training” and “ADLs Training” protocols. In both protocols,
it is possible to access the movement configuration.
In the first screen, you will be able to configure the 8 primitive movements and additional personalized movements.
- Wrist flexion and extension.
- Thumb flexion and extension.
- Flexion and extension of fingers 3, 4 and 5.
- Index flexion and extension.
- Primitive personalized movements.
Last session:
It loads all the configuration of the last session (from both primitives
and complex movements).
Habituation:
It loads the intensity value set as motor threshold, the frequency and
the pulse width defined in the Habituation protocol.
By default:
It loads all the standard electro-parameter values for the specific pa -
thology selected for the patient.
Current:
It loads the current configuration values. It will always change to this
state.
Collective
Clicking on the "+" and the "-" the intensity of all the cathodes is
edited at the same time.
Individual
By clicking "Edit intensities" the intensity of the cathodes is edited
independently. To do this, the cathodes must be selected one by one
in the virtual electrode.
CONFIGURATION BAR
Stimulation parameters
Select the configuration to load. By default, ex -
cept for the first time, the last configuration made
for that patient will be loaded.
Press “Play” to start the stimulation. The configu -
ration will be saved automatically.
Press “Next” to continue with the Complex
Movement Configuration.
Select configuration
Edit intensity
Play
Select the primitive movement to configure.
A personalized primitive movement can be creat -
ed by clicking on the "Config1" and "Config2" op -
tions. To change the title and image of the person -
alized movement, make a long touch on the title.
Select/create movement
Select the cathodes starting with the ones with
an asterisk and, if there is no motor response,
continue with the gray cathodes.
There are two options for selecting cathodes:
1) Select the cathodes and press "Play".
2) Make a long touch on the cathodes.
Select cathodes
Start / Stop stimulation
CONFIGURATION |
Primitive Movements
5
2
3
4
1
6
It is highly recommended to edit the intensity with caution!
This parameter is related to the comfort and safety. Then, it is highly recom -
mended to increase it gradually taking the motor threshold into account.
!
Edit the intensity increasing the value progres -
sively.
Stimulation parameters can be edited (frequen -
cy and pulse width) by clicking on the "Expand"
button .
INSTRUCTIONS FOR USE | Fesia Grasp 39
03 FESIA PRO APP
38 INSTRUCTIONS FOR USE | Fesia Grasp