16
17
Ferroli F 30 B
Ferroli F 30 B
Connection with concentric flue system
The unit can be connected to a concentric air/flue duct with a horizontal or vertical outlet as shown on the following
drawings. Numerous accessories are available on request to meet the various installation requirements. Please refer
to our “flue manual” or the price list.
Horizontal concentric flue installation
Horizontal flue installation
1. Define the position for installing the unit.
2. When installing a horizontal flue kit, please ensure a 3mm per metre fall back to the appliance is incorporated.
3. Make a hole of diameter 10 - 20 mm greater than the nominal diameter of the concentric pipe used.
4. If necessary, cut the end pipe to size, ensuring that the external pipe protrudes from the wall by between 10 and 60
mm (Fig. 10a and 10b). Remove the cutting burrs and lubricate the seals with a suitable sillicone based grease.
5. Connect the flue to the boiler, positioning the seals correctly. Seal the flue into the wall with silicone or sand & cement
* = between
10 and 60 mm
Drill the wall 10‚20 mm
more than the pipe diameter
010008X0
* = between
10 and 60 mm
Drill the wall 10‚20 mm
more than the pipe diameter
95
125
S
50*
125
50*
125
50*
S
D
L
30
95
178,5
281,5
L
P
50*
S
191
191
95
30
178,5
281,5
30
Install level
Install level
1KWMA56W
Install level
Install level
D
S
95
30
P
281,5
178,5
75
Side view
View from above
fig. 10a
Side Outlet
fig. 10b
Front view
View from above
P = S + 176 mm
Rear Outlet
L = S + D + 163,5 mm
Summary of Contents for DOMIcompact F 30 B
