Remote Software
You can control your PULSE16 DX from a computer using Ferrofishs
RemoteFish
App (available for Mac and PC). To do so you can choose
between the following connection methods:
MIDI Interface
Use a MIDI interface to connect your PULSE16 DX to your computer.
Please make sure that the MIDI interface can transmit and receive
system exclusice (SysEx) data.
MIDI over MADI
You can also use the MADI connection with a MADI card, which uses
the MIDI-over-MADI protocol. Unfortunately not all MIDI expansion
cards or MADI devices provide this feature. If you want to use MIDI-
over-MADI please make sure that your device supports this feature.
For further details please read the expansion cards handbook or
contact the manufacturer.
REMOTE over DANTE
With the release of Pulse16 Series firmware version 3 the remote
control operation of the RemoteFish App over a existing DANTE
ethernet connection is possible.
For further information about the remote software please visit:
www.ferrofish.com
