Main Menu – SETUP
In the SETUP menu the following settings can be done:
BNC Termination
The PULSE16 DX wordclock is terminated internally by default with a
75 ohms resistor. When daisy-chaining the wordclock of several units,
you should leave this option set to ON. If you’re using T-connectors for
connecting several units, set this option to OFF.
Keyclick
Let’s you switch the Keyclick sound on or off. Switching the sound off
can be advantageous in critical situations like e.g. editing the PULSE16
DX’s parameter inside a cave next to a grizzly bear in hibernation.
Brightness
Here you can set the brightness of the displays. In case the PULSE16 DX
is not operated the display will be dimmed after some seconds.
MADI 96k frame
When using the SMUX/2 mode, there exist two transmission standards
for MADI:
•
48k frame: Transmission is identical to the SMUX/1 mode,
except two channels are grouped to one channel, resulting in
32 channels.
•
96k frame: Instead of grouping channels, the channels are sent
directly, but using a shorter packet consisting of 32 channels.
