![background image](http://html1.mh-extra.com/html/ferroamp/pylontech-m1/pylontech-m1_installation-manual_2281780018.webp)
17
21. Make sure that all DIP switches on the back of the ESOs are in
the correct position and then place the ESOs as shown above.
22. Install cage nuts for the ESO front plate and the cover plate in
holes no. 3, 11, 13, 25 and 37 as shown above.
23. Pull the ESOs about 5 cm out of the cabinet and then
mount the ESO front plate as shown above.
24. Position the ESOs so that the front plate rests against the
strips on the rack cabinet and then fasten the front plate to
the prepared cage nuts. Then attach the cover plate above the
front plate as shown above
Summary of Contents for Pylontech M1
Page 1: ...Installation manual Pylontech M1...
Page 11: ...10...
Page 20: ...Electricity Reinvented...