![background image](http://html1.mh-extra.com/html/ferroamp/pylontech-m1/pylontech-m1_installation-manual_2281780015.webp)
14
3. Connect battery modules on the left half of the rack cabinet with
DC A type cables as shown above.
4. Connect battery modules with communication cables as shown
above.
5. Connect the two lower battery modules with DC cable type A as
shown above.
6. Connect the two battery modules at the bottom with a
communication cable as shown above.
7. Connect the battery modules on the right half of the cabinet with
DC cables type A as shown above.
8. Connect the battery modules on the right half of the cabinet with
communication cables as shown above.
9. Check that the battery modules are connected correctly by
measuring the voltage between the positive and negative poles as
shown above. The voltage should be above 600 V (32 V per
module).
Summary of Contents for Pylontech M1
Page 1: ...Installation manual Pylontech M1...
Page 11: ...10...
Page 20: ...Electricity Reinvented...