136
T250A-T320A
Rev. 1.1
OPTIONAL UNITS
12.7
12.8
12-Kit doppio effetto 1° braccio (T430)12-Kit doppio effetto 1° braccio (T430)
6
7
8
►
Remove the cable retainer (
6
) from the slider, pushing from one of the two sides.
►
Pull out the slider (
7
) pushing it from above until it comes out of the control valve (a certain oil amount will come
out).
►
Fit the spring, placed on the lower side of the slider, then re-fit it on the slider provided with the kit.
►
Insert the new slider in the control valve, reconnect the control cable by means of the retainer (
6
), then re-fit the
lower (
4
) and upper cover (
3
).
►
Adjust the stroke of the first boom control lever so that it does NOT move idle.
►
Unscrew the blind cap (
8
).
Summary of Contents for T250A right
