FERRI T250A right Use And Maintenance Manual Download

Page: 97 / 140

Rev. 1.1

T250A-T320A

ROUTINE MAINTENANCE

7.1

07-Ingrassaggio

7.4 Greasing

LUBRICANT

TYPE

CLASSIFICATION

AGIP GR MU EP/2

SAE90

►

Use a hand-held grease gun for all greasing.

►

Wipe the grease nozzle with a clean dry cloth, to avoid injecting dirt and grit.

►

Under particularly taxing work conditions, perform lubrication operations more frequently than the every 8 hours

usually adopted.

►

Replace or repair damaged or broken nozzles immediately.

►

If the nozzles will not take grease, remove and clean them thoroughly. Also clean the lubricant passageway.

Replace the nozzle if necessary.

►

In the event of long inactivity, repeat these operations before using the machine again.

INCREASE THE FREQUENCY OF MACHINE MAINTENANCE IF IT IS BEING USED IN

PARTICULARLY TAXING WORK CONDITIONS.

CAUTION

Summary of Contents for T250A right













































































































































Search results

Summary of Contents for T250A right

Reviews:

Related manuals for T250A right

Brands by name

Popular brands

FERRI T250A right, Use And Maintenance Manual

Search results

Summary of Contents for T250A right

Reviews:

Related manuals for T250A right

Brands by name

Popular brands