51
Rev. 1.1
T250A-T320A
TRANSPORT AND INSTALLATION
4.6
4
6
1
5
5
1
3
2
7
04-Aggancio (Decespugliatrici)
4.3.2 Attaching Without a Quick Hitch
1)
Bring the 2 arms of the tractor hydraulic lifting device (
1
) closer to the machine near the attachment with the pins.
2)
Insert the pins (
2
) with the respective elastic safety split pins (
3
).
3)
Insert the third point stabiliser (
4
) and raise the machine. Align the power takeoff with the tractor PTO. Adjust the
stabiliser (
4
) to bring the tank parallel to the ground.
4)
When the shredding flail head is applied, check to make sure that it rests parallel with the ground. If it does not,
adjust the correct positioning using the third point stabiliser (
4
).
5)
Tighten the 2 arms of the lifting device by using the respective stabilisers (
5
) and set the machine in central position.
6)
Tighten the stabilisers (
6
) to the tractor coupling plate (
7
).
7)
Adapt the stabilisers (
6
) as follows:
►
Extend the stabiliser on the tank side and contract the stabiliser on the side opposite the tank;
►
After tensioning, lock the stabilisers in place using the appropriate lock nut.
8)
Close again the stabiliser support feet.
9)
Proceed in reverse order to detach the machine from the tractor.
Summary of Contents for T250A right
