Use
21
Extracting the battery
16
15
10
8
16
Release button
1. Press the release button
16
of the
inserted rechargeable battery
15
and keep it pressed down (see
Fig. 8
).
2. Pull the battery out of the holder
10
.
The battery is now extracted.
If the battery cannot be removed easily, this means that the release but-
ton has not been pressed with enough force. Press the release button
on the battery more firmly.
Attaching/replacing sanding sheet
WARNING!
Risk of injury!
Improper handling of the product can lead to injury.
− When attaching/replacing the sanding sheet, always switch the product
off and remove the rechargeable battery.
− Use only sanding sheets that correspond to the edge lengths of the
respective sanding plate.
− Use only sandpaper whose width corresponds to the width of the sanding
plate. If necessary, cut the sandpaper to size.
− If you use sandpaper, punch holes in it for the dust extraction.
− Make sure that the dust extraction openings of the sanding sheet or sand-
ing paper and the sanding plate match up with each other.
