Faults and troubleshooting
25
Faults and troubleshooting
Problem
Possible causes
Solution
The product
will not start.
The rechargeable battery
15
has been drained.
Insert a charged battery.
The battery is not correctly in-
serted in the battery holder
10
.
Insert the battery correctly into
the battery holder.
Too much pressure is being ap-
plied to the product, which blocks
the oscillating movement of the
sanding plate
2
/
3
/
4
.
Reduce pressure on the product.
The sanding
performance
is poor.
The sanding sheet
17
or sand-
paper
21
is worn out.
Use a new sanding sheet or
sandpaper.
The sanding sheet or sandpaper
is unsuitable for the respective
working material.
Use a suitable sanding sheet.
The sanding
sheet does
not adhere to
the sanding
plate.
The hook-and-loop fastener
surfaces of the sanding plate or
sanding sheet are dirty.
Clean the hook-and-loop fastener
surfaces.
The sand-
ing dust is
not being
extracted.
The extraction openings of the
sanding plate are covered by the
sanding sheet or sandpaper.
Attach the sanding sheet so that
the openings in the sanding
sheet and the extraction open-
ings of the sanding plate match
up with each other.
Punch holes in the sandpaper
and place the sandpaper such
that the openings in the sand-
paper and the extraction open-
ings of the sanding plate match
up with each other.
