manualshive.com logo in svg

FERREX FAPS 20-I, User Manual, Page: 23 / 30

Share
Download
FERREX FAPS 20-I User Manual Download Page 23

Troubleshooting

23

Troubleshooting

Problem

Possible cause

Solution

Device does not 

work

The rechargeable battery is 

not inserted.

Insert the rechargeable battery.

The saw’s cutting 

power is poor.

The saw blade is dull.

Have the saw blade sharpened 

or replace it with a new one.

The cuts are 

imprecise.

The angle settings have 

changed.

Readjust the angles. 

Cleaning and maintenance

 

WARNING!

Risk of injury!

Accidentally starting the product may result in severe injury.

 

− Take the rechargeable battery out of the product before cleaning or 

performing any maintenance on it.

 

− Wear suitable protective gloves.

NOTICE!

Risk of damage!

Water or other liquids that have penetrated the housing may cause a short 

circuit.

 

− Never submerge the product in water or other liquids.

 

− Make sure that no water or other liquids penetrate the housing.

NOTICE!

Risk of damage!

Improper handling of the product can damage the product.

 

− Do not use any aggressive cleaners, brushes with metal or nylon bristles, 

sharp or metallic cleaning utensils such as knives, hard scrapers or similar. 

They could damage the surfaces.

Summary of Contents for FAPS 20-I































Reviews:

No comments