Preparation
18
Attaching the parallel guide
• The parallel guide can be attached to both sides of the saw blade.
The parallel guide makes it possible to make a straight cut parallel to
the workpiece’s stop edge.
• You can always saw without a parallel guide. Using a parallel guide
is not absolutely necessary.
1. Loosen both locking screws
12
on the saw shoe
7
(see
Fig. H
).
2. Guide the parallel guide
16
into the holder on the saw shoe.
3. Adjust the distance by positioning
the desired number of centimetres
on the parallel guide above the
red line
20
(see
Fig. 1
).
4. Tighten the locking screws.
Using the rechargeable
battery
WARNING!
Risk of injury!
Incorrect use of the rechargeable battery and charger can cause injury.
− This product does not come supplied with a battery. Only use the
rechargeable batteries specified in the chapter ‘Technical data’ for the
product. Do not operate the product with rechargeable batteries from
other manufacturers.
− Read and follow the instructions in the user manual for the battery pack
and charger used.
− Remove the rechargeable battery from the product when you are not
using it, when you are checking it, when you are changing the saw blade,
cleaning it or putting it in storage.
Fig. 1
20