Preparation
14
b)
Fasten and secure the workpiece to a stable surface using clamps
or in another manner.
If you only hold onto the workpiece with your
hand or put it against your body, it will remain unstable and could
lead to loss of control.
Preparation
WARNING!
Choking hazard!
Do not allow children to play with the packaging material. Children may get
caught in it when playing and suffocate.
− Keep children away from the packaging material.
1. Remove the packaging material and all protective foils.
2. Check whether the product or the individual parts are damaged.
If this is the case, do not use the product. Contact the manufacturer at the service
address specified on the warranty card.
3. Check to make sure that all parts are included (see
Fig. A, B,
and
C
).
Protective cover
CAUTION!
Risk of injury!
Improperly handling the product and saw blades may result in severe injury.
− The protective cover must always be attached when making cuts.
The protective cover must be opened for 45° cuts.
− Remove the protective cover for cleaning purposes only.
The protective cover
13
protects you against accidentally coming into contact with
the saw
15
, but still lets you see the cutting area.
− Upon installing the protective cover, make sure that the retaining collars on both
sides of the protective cover are positioned in the corresponding recesses on the
device.
− The protective cover can be opened upwards (see
Fig. F
).
− To remove the protective cover, carefully separate the opened protective cover on
both sides and pull the protective cover downwards.