FERREX FAPS 20-I User Manual Download Page 11

Safety

11

any power tool if you are tired or under the influence of drugs, 

alcohol or medication.

 

A moment of inattention while operating 

power tools may result in serious personal injury. 

b) 

Wear personal protective gear and always wear safety glasses.

 

Protective equipment such as dust mask, non-skid safety shoes, hard 

hat, or hearing protection used for appropriate conditions will reduce 

personal injuries. 

c) 

Avoid accidentally activating the device. Make sure that the 

power tool is turned off before you connect it to the power 

supply and/or the rechargeable battery, pick it up or carry it.

 

Carrying power tools with your finger on the switch or connecting the 

power tool to a power supply while the switch is set to “on” may lead 

to accidents.

d) 

Remove all adjusting tools or spanners before you switch the 

power tool on.

 

A wrench or a key left attached to a rotating part of 

the power tool may result in personal injury. 

e) 

Avoid an abnormal posture. Keep proper footing and balance at 

all times.

 

This enables better control of the power tool in unexpected 

situations.

f) 

Wear suitable clothing. Do not wear loose clothing or jewellery. 

Keep your hair and clothing away from moving parts.

 

Loose 

clothes, jewellery or long hair can be caught in moving parts. 

g) 

If there is an option for installing dust suction devices and dust 

containers, these should be attached and used correctly. 

Use of 

dust collection can reduce dust-related hazards.

h) 

Do not be lulled into a false sense of security and ignore the 

safety rules for power tools, even if you are well acquainted with 

power tools, having used them frequently. 

Using power tools 

without due care and attention can cause serious injuries in a split 

second.

Using and handling the power tool

a) 

Do not overload the power tool. Use the right power tool for your 

work.

 The correct power tool will do the job better and safer at the 

rate for which it was designed.

b) 

Do not use a power tool if its switch is defective.

 Any power tool that 

cannot be controlled with the switch is dangerous and must be repaired.

Summary of Contents for FAPS 20-I































Reviews: