Preparation
17
Dust blower function
A vacuum cleaner cannot be used to suck up shavings/chips when the
dust blower function is switched on.
− In order to switch on the dust blower function, move the slider for the dust
blower function
6
towards the right, in the direction of the rechargeable
battery (not included in the package contents).
− In order to switch off the dust blower function, move the slider towards the left, in
the direction of the saw blade.
Attaching the shaving/chip extraction system
Make sure that the dust blower function is switched off when you use a
vacuum cleaner.
− To switch off the dust blower function, move the slider for the dust
blower function
6
to the front of the saw or towards the pendulum
stroke adjustment
9
.
Guide the adapter for the shaving/chip extraction system
17
into the recesses on the
rear part of the saw shoe
7
(see
Fig. J
).
The adapter for the shaving/chip extraction system must audibly click into place so
that it is firmly positioned in the saw shoe.
1. Attach the vacuum cleaner’s suction hose onto the shaving/chip extraction
system’s round opening. Make sure the devices are connected airtight.
2. To detach the adapter for the shaving/chip extraction system, press the button on the
adapter for the shaving/chip extraction system and pull it out of the saw shoe
7
.
• The adapter cannot be used if the saw shoe is set at an angle greater
than 15 degrees.
• A vacuum cleaner cannot be used to suck up shavings/chips when
the dust blower function is activated.