Ferrari SF90 STRADALE 2020, Owner'S Manual

Page: 28 / 70

28
Roadside Recovery
Access to the power socket
The socket for connecting the supplied power lead or the charging station
lead is located on the LH side of the vehicle and may vary from the one
shown according to market requirements. To access the socket, open the
flap as indicated in the chapter "High voltage and 12V battery charging
socket" (see page 33).
Connecting the power lead to the vehicle
Important note
This paragraph only describes how to connect the supplied power lead
to the vehicle socket. As far as the order the operations are performed
in and connection to the mains are concerned, follow the instructions
given in the special manual included in the on-board documentation.
Before connecting the lead, make sure that the parking brake has been
engaged and that the vehicle is close to the mains socket.
Danger - High voltage
- If the power lead is connected to the domestic power grid, the plug
must be inserted in a suitable socket that has been correctly installed
and earthed in accordance with local regulations and is not damaged in
any way.
- Always check that the current and voltage characteristics of the mains
socket match the requirements of the power cable device included with
the vehicle. The specifications of the power cable device equipping the
vehicle are indicated on the back of the component. Risk of overheating
and fire.
- Children and pets must be supervised when in the vicinity of the
charge lead when it is connected to the mains.
- Never connect the power lead if there is a risk of a storm or lightning.
- Never connect the power lead to an extension lead or multiple socket
and do not use adaptors.
- Always place the power lead where it cannot be stepped on, damaged
or cause personal injury.
- Do not use the power lead if it is damaged: a damaged or faulty cable
can only be repaired or replaced by the F
ERRARI
S
ERVICE
N
ETWORK
.
- Never use the power cable when still coiled and stowed in its case
- Always lay the power cable out before use, avoiding excessively tight
bends and making sure that it cannot be crushed or pinched. Do not use
extension leads.
- To prevent the infiltration of liquids affecting the high voltage cables
during atmospheric events or when washing the vehicle, always put the
internal protective cap (if provided) on the socket once the power lead
plug has been removed.
- Unwind and lay out the cable, avoiding excessively tight bends and
making sure that it cannot be crushed or pinched.
- DO NOT use extensions of any type. DO NOT use adapters of any
type.
Important note
The engine must not be started up as long as the power lead is
connected to the vehicle socket. If the instrument panel is on, a pop-
up appears with a message accompanied by a special symbol.
Warning
Never try and start the vehicle with the power lead connected.
Take the power lead for charging the battery out of the bag.