Ferrari Portofino Manual Download Page 172

Page: 172 / 208

172

ADVICE FOR EMERGENCY SITUATIONS

Warning

While towing the vehicle, you must comply with Road Regulations.

Warning

Do not tow the vehicle by attaching to levers, suspension and wheel
rims but only to the tow hook properly fitted in place.

Keep the instrument panel activated to enable the lights to work; when
towing the vehicle, do not start the engine.

Important note

Remember that when the engine is switched off, the power steering and
brake servo functions do not work.

Fuel inertia switch

The fuel inertia switch is a safety device which deactivates the fuel pump
relays if a collision occurs.

A symbol appears on the left TFT display and the hazard warning lights
come on to indicate that the switch has been activated.

When the fuel inertia switch is activated, the doors are also unlocked (if
locked) and the central dome light comes on.

Warning

The fuel pump relays can be reactivated by pressing button A on the
floor in front of the driver's seat.

Battery

The battery is located on the right-hand side of the engine compartment:
to access it, remove the cosmetic shield by unscrewing the screws on the
top of the shield.

Checking the battery

Summary of Contents for Portofino

















































































































































































































Search results

Summary of Contents for Portofino

Reviews:

Related manuals for Portofino

Brands by name

Popular brands

Ferrari Portofino, Manual

Search results

Summary of Contents for Portofino

Reviews:

Related manuals for Portofino

Brands by name

Popular brands