Ferrari Costruzioni Meccaniche GREENCAM TSA-40, Instructions For Use And Maintenance Manual

Page: 66 / 80

OPERATING INSTRUCTIONS AND MAINTENANCE 2020
Pagina 66 di 80
Configuration of the lifting time
Set the likely minimum lifting time of the tool carried during a turn at the end of the field.
►
Call up the <General Settings> menu.
►
Lightly tap the input field (1).
►
Enter and confirm the value.
Example
Lowering: 180 seconds
Lifting: 30 seconds
The tool must be in the lower position (working position) for 180 seconds before proceeding to the next step. If the tool is lifted at
the end of the 180 seconds, the "high period" (raised) begins. If the tool is lifted for 30 seconds during the end-of-field turning, the
conditions for changing the displacement are met. If the tool is lowered, the displacement changes. The operation starts from the
beginning.