Ferrari Costruzioni Meccaniche GREENCAM TSA-40, Instructions For Use And Maintenance Manual

Page: 16 / 80

OPERATING INSTRUCTIONS AND MAINTENANCE 2020
Pagina 16 di 80
WARNING: the connectors of the automatic guidance system
must be connected / disconnected only with the tractor
turned off.
Also connect the hydraulic feeding pipes: blue cap in discharge
and red pipe in discharge:
Once in the field, mount the optical lens on the adjustable rod
and connect it to the connector.
By acting on the removable support, adjust the optics so that it
points on the first row.
Then switch on (with tractor running) the monitor and the
console and put the hydraulic circuit of the tractor in mode
always in.
In figure the initial screen of the console:
For the setting of the automatic guidance system, see Section 6
Attachment A
Attachment A
SECTION 4
Ordinary Maintenance
4.0 MAINTENANCE OPERATIONS
During work and maintenance, use the appropriate personal
protective equipment (e.g.):
At the end of each working day, after having put the machine
in stock as indicated in the previous paragraph, we advise you
to carry out a short maintenance. This will allow you to keep
your tool always efficient, avoiding unpleasant surprises or
dangerous situations at the time of its use.
In particular, it shall:
•
Before carrying out maintenance, maintenance and
repair work, or before investigating the cause of a
rupture or malfunction, it is absolutely necessary to
ensure that the tractor engine is stationary, that the
key to the tractor panel is not inserted, that the
machine rests flat and that the supplied feet are in the
correct position.
•
Wear-resistant personal protective equipment must
therefore be regularly checked. Replace them
immediately if they have been damaged.
•
Grease all shifting parts indicated by the relevant label