Ferrari Costruzioni Meccaniche GREENCAM TSA-40, Instructions For Use And Maintenance Manual

Page: 42 / 80

OPERATING INSTRUCTIONS AND MAINTENANCE 2020
Pagina 42 di 80
detected automatically. Accuracy increases. The risk of incorrect insertions is minimized.
For proper automatic measurement, the ground must be visible to the camera.
If the Seedlings are placed in flowerbeds, wrong measurements may be made. In this case, disactivate the automatic a
measurement.
Activation of automatic measurement
•
Call up the General Settings menu.
•
Tap the selection box (1). The selection window opens.
•
Select and confirm the selection box.
Automatic measurement is enabled. The measured values are displayed to the right, next to the selection box.
The height of the camera is measured automatically with an accuracy of ±5 cm in the range between 50 cm and 250 cm. The camera
angle is measured automatically with an accuracy of ±3° in the range between -5 and 50°
3.5 Automatic camera height control
The CULTI CAM system controls the camera height measured automatically or manually. The adjusted camera height is compared
with the recommended minimum heights for Seedlings settled.
The control is made when the automatic driving is in action. This happens when:
•
The automatic driving is inserted
•
The device reported stand in action (lowered)
•
The minimum feed speed is exceeded
After 3 seconds control begins.
If the current camera height deviates by ±25 cm, an error message is displayed for 5 seconds. The message cannot be confirmed and
is displayed whenever the automatic control is active.