Ferno Mondial MB64 User Manual Download Page 26

© Ferno-Washington, Inc. / 234-3480-06 / November 2017

26

Using the Cot

ROLLING THE COT

1.  Securely fasten the restraints around the patient.
2. 

Both Operators

: Place the cot at a suitable rolling height and 

unlock the wheel locks. See “Cot Positions” on page 10.

 

If the swivel function on the loading-end wheels is needed, 

place the cot in Bed Position 6. See “Swivel-Lock Release Lever” 

on page 15.

 

If you are rolling the cot in the control-end direction (feet first), 

the loading-end operator should unlock the loading-end caster 

wheels. 

3. 

Control-end Operator

: Position yourself at the side of the cot  

near the patient’s feet (Figure 31) or at the control end of the cot. 

Grasp the main frame and/or footrest to roll the cot.

4. 

Loading-end Operator

: Position yourself at the loading-end 

of the cot (Figure 31) or at the side of the cot near the patient’s 

torso. Grasp the main frame. Attend the patient and assist in 

rolling and steering the cot.

 

 

WARNING

Rolling the cot sideways can cause the cot to tip and 

injure the patient or operators. Roll the cot only with the 

loading-end or control-end first.

Important

Roll the cot downhill control-end first.
If it is not medically appropriate to do this, roll the cot loading-

end first 

and 

have the Assisting Operator exert upward force 

on the main frame to help maintain cot balance.

6.5  Rolling the Cot

GENERAL GUIDELINES

● 

Rolling the cot with a patient on the cot requires a 

minimum

 of 

two trained operators who are communicating, working together, 

and maintaining control of the cot at all times.

● 

Use Bed Position 6 to roll the cot. Note that the cot must be in Bed 

Position 6 to unlock the loading-end caster swivel locks.

● 

Roll the cot on smooth, unobstructed surfaces whenever possible.

● 

To cross a low obstacle such as a door sill, lift the cot slightly to 

take the weight off the wheels so the wheels roll smoothly over 

the obstacle.

● 

Lift and carry the cot over a high obstacle such as a curb.

 Do not

 

apply downward force on one end of the cot in order to raise the 

other end of the cot.

● 

If the cot is equipped with the auxiliary leg lock, the operators may 

fold the cot and carry it. 

● 

Do not roll the cot sideways. Rolling a cot sideways can increase the 

chance for the cot to tip and injure the patient and/or operators.

● 

Use additional help as needed to safely control the weight of the 

patient and cot. See “Using Additional Help” on page 7.

● 

When rolling over rough terrain, the operators (and helpers) should 

grasp the cot main frame with both hands.

31 

Control-end Operator

Loading-end Operator

Summary of Contents for Mondial MB64





































Reviews: