Ferno Mondial MB64, User Manual, Page: 23 / 36

© Ferno-Washington, Inc. / 234-3480-06 / November 2017
23
6 - USING THE COT
Using the Cot
WARNING
Improper operation can cause injury. Operate the cot
only as described in this manual.
An unattended patient can be injured. Stay with the
patient at all times.
An unrestrained patient can be injured. Use patient
restraints to secure the patient on the cot.
Rolling the cot sideways can cause it to tip and injure the
patient or operators. Roll the cot only with the loading
end or control end first.
Operation Requires
Two Trained Operators
Read the Users’ Manual
6.1 Before Placing the Cot in Service
●
Before use, personnel who will work with the cot must read and
understand this manual. Appropriate skills and training are also
required. See “Operator Training” on page 6.
● Set up the cot, following the instructions “Setup” on page 11.
● Confirm that the cot operates properly. See “Inspecting the Cot” on
page 31.
●
The vehicle must have a Ferno® fastening system installed. See
“Compatible Fastening Systems” on page 8.
6.2 General Guidelines for Use
●
Medical advice is beyond the parameters of this manual.
●
It is the users’ responsibility to ensure safe practices for the patient
and themselves.
●
A
minimum
of two trained operators is required.
●
Follow standard emergency patient-handling procedures when
operating the cot.
●
Operators work together and maintain control of the cot at all
times.
●
Operators must communicate with one another and use
coordinated movements to operate the cot.
●
Operators must stay with the patient at all times.
●
Always use patient restraints to secure the patient on the cot.
●
Select appropriate restraints for the patient being transported. A
list of Ferno patient restraint systems compatible with the cot is
at right.
● Lift only the weight you can safely handle. Use additional help
when working with heavy loads (patient and equipment). For
placement of helpers, see “Using Additional Help” on page 7.
●
When changing cot positions or when unloading it from an
ambulance, verify that both sets of legs have locked into the new
Bed Position before you release your grasp on the main frame.
●
Read the fastening system users’ manual for instructions on using
the fastening system. See “Fastening System Compatibility” on
page 4.
Load Capacity
Inspect the cot if the load capacity has
been exceeded. See “Inspecting the Cot”
on page 31.
620 lb
280 kg
44 st
Ferno Patient Restraint Systems (Not Supplied)
Ferno Product
Metric
Patient Weight
Imperial
Patient Weight
Model 678 Pedi-Mate® 4.5-18.1 kg 10-40 lb
Mondial® Harness and Leg Restraint Up to Rated Load Capacity
*Follow local protocols for selection and application of patient restraints. See
“Accessories” on page 34.