5
© Ferno Washington Italia ScoopExl - Rel.161115 - ENG
SCOOP EXL Stretcher
Main label
Load capacity (in kilograms, pounds, and stones)
Safety information
1.7 Information and safety labels
The information and safety labels contain important information that the user needs to know.
Read and follow label instructions. Immediately replace the labels if they are worn or damaged. To obtain replacement labels
contact Ferno Washington Italy's Customer Services (page 2).
The Manufacturer reference numbers, the CE mark, and the serial number, are on the rear of the stretcher (on the right side
of the body as seen by the operator).
1.6 Glossary of symbols
The symbols used in this manual and / or on the stretcher's labels are defined below. The CE mark is present on the stretcher
and in this manual.
Read the user manual
carefully
The product meets
European Union
Standards
Load capacity
(in kilograms, pounds, and
stones)
Do not wash with high
pressure water
QR Code
The stretcher requires at
least two qualified operators
for correct use
2
227 kg
500 lb
36 st
227 kg
500 lb
36 st
SWR
Never exceed the load capacity of the SCOOP EXL stretcher. Inspect
the stretcher if the carrying capacity has been exceeded (see section
Inspection
).
SWR- Strength to Weight Ratio = 28.4
Safety factor = 2
