Cod. 97864b V09_19
5
BY REMOTE CONTROL
Notes:
⚫
Remote Control:
Please use the Infrared Remote Control to program the controller. The
“IR” on the
controller is the infrared receiving window, please direct the Remote Control to
it.
⚫
User ID number:
Assign
a user ID to the access card in order to track it. The common
user ID number can be any number fom 0~999. IMPORTANT: User IDs do not have to be proceeded with any
leading zeros. Recording of User ID is crical. Modifications to the
user require the User ID be available.
⚫
PIN:
Can be any 4~6 digits except 8888 which is reserved.
For the users: after entering the code confirm with dash (Eg: 9876#)
Enter and Exit Program mode
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
(Factory default is 123456)
2. Exit Program Mode
*
Set Master Code
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Update Master Code
0
（
New Master Code
）
#
（
Repeat New
Master Code
）
#
(code: 6 digits)
3. Exit Program Mode
*
Add Users with Remote Control
Programming Step
Keystroke Combination
Add Card User
1. Enter Program Mode
* (Master Code) #
2. Add Card: Select Specific ID
(Allows Master to define a specific User ID to
associate the card to)
1 (User ID) # (Read Card on External
Reader) #
The user ID is any number from 0-999
3. Exit Program Mode
*
Note:
Users with a card have a default PIN code of 8888, which is not valid in card + PIN mode. It is necessary
to change default code for that mode of operation to see 'Change code' and 'Access mode'.
Add PIN User
1. Enter Program Mode
* (Master Code) #
2. Add PIN: Select Specific ID
(Allows Master to define a specific
User ID to associate the PIN to)
1 (User ID) # (Input PIN) #
The user ID is any number from 0-999
(PIN: 4~6 digits)
3. Exit Program Mode
*
Example:
- PIN 9876 ID=1:
*
(Master Code) # 1 1 #9876#*
-PIN 6543 ID=5:
*
(Master Code) # 1 5 #6543#*
