Cod. 97864b V12_18
STAND-ALONE CONTROLLER 1DOOR WG
EN Installer Manual
Introduction
The MINI controllers provide wiegand readers with autonomous control and the connection of both the door opener and
the exit button. The controller includes an infrared programming keyboard for programming and maintenance of the
installation
. We recommend installing the controller behind the reader in a separate register not accessible from the
outside.
Features
-
1,000 users’ u
ser data can be transferred
- Multi access modes: Card, Card or PIN, Card with PIN and multi Cards/PINs
- Can connect with reader with Wiegand 26 bits output
- Can connect with any keypad reader with 4bits, 8bits (ASCII), or 10bits Virtual number output
- Support Master Card function
Specifications
Stand-alone mini controller 1 door Wiegand
Model
Stand-alone MINI controller 1 door Wiegand
User Capacity
1.000
Multi access modes
Card, Card or PIN, Card with PIN and Multi Cards/PINs
Operating Voltage
12Vdc (9-24VDC)
Idle current
20mA / 110mA
*
Relay
Adjustable Relay Output Time
2Amp Maximum
1-99 (5 seconds default)
Protocol
Wiegand 26bits
Physical
ABS
Distance
100m Max.
Operating Temperature
-20ºC a +60ºC
Dimensions
54mm × 65mm × 9mm
Humidity
90%
When Use NO/NC/COM Dry Contact Output
*
1) Remove the Pin Caps on points 1, 2 and
points 3, 4
2) Insert one of the Pin Caps on points 1, 3
3) Fix the back cover, and keep the other Pin
Cap well
