IP VarioBell
- installation and operating instructions
8
Assembly of modules
The IP-Fermax doorphone is a modular system, it includes an advanced
technology, timeless design. It is easy for installation and operation.
The IP-Fermax doorphone is equipped with two switches or it can control two
remote IP switches via http commands. It can be PoE powered. You can
choose a version with or without a colour camera. The entire system can be
expanded to a maximum of 200 push buttons. It can also be expanded by a
keypad.
The IP-Fermax 1CP201IP doorphone has two push buttons and a colour
camera. The IP-Fermax 1AP201IP doorphone has two push buttons, it is an
audio version without a camera The IP-Fermax Skyline version is a modular
system. The basic IP-Fermax Skyline video module 7421IP contains the main
VoIP board, switches, PoE, ETH port and a colour camera. The basic IP-
Fermax Skyline audio module 7415IP contains the main VoIP board, switches,
PoE, ETH port, it is without a camera.
The Fermax Skyline expanding push button modules and a numeric keypad
are the Fermax VDS / BUS2 modules. The Fermax Skyline expansion modules
are connected with the 6-core Fermax cable, which is always a part of each
Fermax Skyline expansion module.
The Fermax keypad is automatically detected in the system, it does not need to
be programmed. Also it does not matter where the Fermax keypad is
connected.
The Fermax Skyline VDS / BUS2 push button modules are connected in an
independent order of the numbering of the push buttons. The Fermax Skyline
push buttons numbering is programmed in the usual Fermax way
– by pressing
the push buttons in the order from the first to the last (see more details further
in the text).
Voice modules without a camera
Basic module Basic modular Skyline module
1AP201 7415IP
