Pag 13
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
9
8
7
6
5
4
3
2
1
A
B
0
3
2
1
4
B
+ )
(
3
2
1
4
B
4 digits
6 digits
+ )
(
4
B
3
4
3
2
1
C o d e
. . .
d 1. 1
REMOTE UNIT
FOR ACCES CONTROL
+
3
2
1
7
8
9
0
x
-
6
5
4
REMOTE UNIT
FOR ACCES CONTROL
+
3
2
1
7
8
9
0
x
-
6
5
4
0 0 0 6
C o d e
d 1. 1
REMOTE UNIT
FOR ACCES CONTROL
+
3
2
1
7
8
9
0
x
-
6
5
4
0 0 0 1
REMOTE UNIT
FOR ACCES CONTROL
+
3
2
1
7
8
9
0
x
-
6
5
4
A d d
7b. If it was a keypad code (if the reader has a keypad).
4 or 6 digit code + B.
For example:
The code has already
been registered
1 beep
1 beep
8. d1.1 re-appears
, allowing us to continue registering users. Repeat the aforementioned steps to register
new users in mode 2 finger proximity or code.
NOTE:
- The choice of number of digits (4 or 6) is chosen using the option:
Code
Accept
Select an option:
0004 or 0006
NOTES:
- The same fingerprint cannot be entered twice on different registers (user number), therefore if it is
already registered on the system it cannot be re-registered.
- The master fingerprint cannot be the user fingerprint either.
- The same proximity card cannot be entered twice on different registers (user number), therefore
if it is already registered on the system it cannot be re-registered.
e) Add user ONLY proximity or code.
Some people’s fingerprints do not have the information required to register them in a
biometric system. An estimated 1% of the population. In these cases use integrated
Proximity or a reader with a keypad to enter a code.
Enter Programming Mode
Standby Mode
1. Enter the master fingerprint
1 beep
2. Confirm the Add option with the
validation key
3.
d1.1
is shown. Press the OK key WITHOUT entering the user fingerprint. The user number that will be
registered in the system will be shown and the LEDs will flash. The reader is ready (LEDs flashing) for a card
or code to be entered (if the reader has a keypad).
1 beep
1 beep
