Pag 23
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
FINGERPRINT
d 2. 1
REMOTE UNIT
FOR ACCES CONTROL
+
3
2
1
7
8
9
0
x
-
6
5
4
x
0 y
t r d
t r d
TR
AD
ES
TR
AD
ES
REMOTE UNIT
FOR ACCES CONTROL
+
3
2
1
7
8
9
0
x
-
6
5
4
U n b L
0 y
d 2. 1
REMOTE UNIT
FOR ACCES CONTROL
+
3
2
1
7
8
9
0
x
-
6
5
4
d 2. 1
1b.
d2.1
is shown, cancel if we wish to register a
trade card
. The LEDs of the reader start to flash, present
the card that we wish to register in the system as the trade card.
1 beep
Cancel for trade card
1 beep
1 beep
* Activate the Trades function
This function is used when you want to offer free access to an area to be controlled. It is
activated by sliding the trade fingerprint/presenting the trade card through the reader’s
sensor when in standby mode . The function remains enabled until the trade fingerprint
is entered/the trade card is presented again, and then it will be disabled.
In this mode, any fingerprint/card entered will activate the lock-release. The green LED
on the reader will flash when this mode is enabled.
Standby Mode
1 beeeep
function enabled
any
fingerprint
or card
1. Enter the trade fingerprint
or present the trade card
2. Enter the trade fingerprint or present the trade card
function enabled
function disabled
d) Add an unblock fingerprint/card
The Unblock option is a special function. In this mode the lock-release relay remains
continuously enabled. You can register an
unblock fingerprint
or
register an unblock
card
.
To add an unblock card/fingerprint access the option:
UnbL
.
1 beep
1 beep
1 beep
1.
d2.1
is shown, confirm if we wish to register a
unblock fingerprint
.
Enter the new user fingerprint you
wish to register as an unblock fingerprint on the system.
Confirm for unblock
fingerprint.
