Fermax CITY FINGERPRINT READER, User& Installer'S Manual

Page: 7 / 36

Pag 7
FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT
0001
0002
0003
0004
Yaga Seelan
Will Smith
Tom Cruise
Sarah Parker
Nº Usuario
Nombre Usuario
d 1. 1
REMOTE UNIT
FOR ACCES CONTROL
+
3 2 1
7 8 9
0
x -
6 5 4
A d d
0 y
d 1. 2
0 0 0 1
Add Users
To register new users. Every user has an associated "user number" from 0001 to maximum.
The codes are stored in the memory in sequence:
user number - user fingerprint .
Number of Users:
* 4500 in 1 fingerprint per person mode.
* 2970 in 2 fingerprint per person mode.
NOTE:
- It is very important to compile a list linking the user names and numbers (fingerprint
recorded position) such that it will only be possible to delete a fingerprint if you know its
associated position. The only other option is to delete ALL fingerprints on the reader,
therefore we re-iterate the importance of compiling a list with aforementioned data.
Example of table:
The sequence for registering a user passes through all of the possible options
consecutively:
- 1 fingerprint user mode
- 2 fingerprint user mode
- With proximity card or code
Enter Programming Mode
Standby Mode
1. Enter the master fingerprint
1 beep
2. Confirm the Add option with the
validation key
3. d1.1 is shown. Enter the user fingerprint you wish to register in the system.
1 beep
1 beep
1 beep
4. d1.2 is shown. Re-enter the user fingerprint you wish to register to confirm the fingerprint.
a) Add User in 1 Fingerprint Mode
1 beep
1 beep
1 beep
5. Relay is shown. Using the scroll keys the following sequence will appear relay , both , Au .... There are three
options the action of which associated with this user fingerprint is:
- relay: to open the door
- both: to open the door and activate the auxiliary exit simultaneously
- Au: to activate the auxiliary exit
Select the required option and confirm using the OK key