Fermax CITY FINGERPRINT READER, User& Installer'S Manual

Page: 31 / 36

Pag 31
FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT FINGERPRINT
Special fingerprint functions:
- Change the master fingerprint:
- Add a second master fingerprint
- Add a trade fingerprint
MSt
MS1
MS2
trd
Function Code
- Add an unblock fingerprint
- Add a fingerprint, security mode
Operating Modes:
- Standard (no double security)
- Security (double security)
Network Identifier
No autonomous function.
Copy
Number of code digits
Unb
Sec
Mode
Std
Sec
nEt
Prot
COP
Code
1.50m
4.90 feet
SENSOR
Function Description
Maintenance Recommendations
If the reader is installed outside and is wet, the sensor should be removed to ensure its
correct operation (before entering a fingerprint).
Any variation in the users’ fingerprints used on the system, such as humidity, dirt .....etc
could result in correct reading of the fingerprint.
NOTE:
- The reader sensor should be at an approximate height of between 1.40 and 1.60 metres,
independent of the chosen panel.
- An example will be indicated on the installation diagram, assuming it is located on a
series 1 panel.
Installation