Page 27
iLOFT Monitor
iLOFT Monitor
Operation
Canceling the Ring Tone
With the monitor on standby, press the
button 3 times
consecutively in less than 2 seconds.
The red led flashes once every 2 seconds.
To deactivate the ring tone cancellation option, press the
button
3 times consecutively once again, in less than 2 seconds.
The led will return to its previous status.
x 3
«Automatic Release» Mode
When «Automatic Release» Mode is activated, the monitor will
automatically be activated 5 seconds after receiving a call from the
panel.
To activate the «Automatic Release» Mode, press and hold the
+
buttons simultaneously for 2 seconds.
The led remains green.
To deactivate the «Automatic Release» Mode, press and hold the
+
buttons simultaneously for 2 seconds.
The led will return to its previous status.
2 sec.
+
Note:
If the «Cancel Ring Tone» and «Automatic Release» Mode
are activated at the same time, the monitor led will alternate
between red and green every second.
Audio Volume Settings
While communicating with the entry panel, press and hold the
button, until the menu appears on the screen.
- press the button to increase the
audio volume
.
- press the
button to reduce the
audio volume
.
sn3
(There are 5 possible audio options: sn1..sn5)
sn3
You can communicate with the entry panel without having received a
call by selecting «
Auto-Start
» (pressing ) and then pressing the
button.
