Page 23
iLOFT Monitor
iLOFT Monitor
2. Programme the monitor’s address
Option 1: From the entry panel
HIGH R
ESOLU
TION
HIGH R
ESOLU
TION
CCD C
AMERA
CCD C
AMERA
PAN &
TIL
AN & T
ILT
1
2
3
6
4
5
9
7
8
A
0
HIGH R
ESOLU
TION
CCD C
AMERA
PAN &
TILT
Press the residence’s call button
(button panel) or call
code (keypad panel). A ring tone will sound as
confirmation and you will see the number programmed
appear on the screen.
Option 2: From the Monitor
Hundreds: Press the button
Tens: Press the button
Units: Press the button
2.1-
Press the corresponding button for hundreds, tens or units to increase the
corresponding digit by that unit (appears on screen):
Once you reach 9 pressing the
button again will return you to
0 and an error tone will sound.
The next time you press the
button it will start from the
number 1.
000
2.2-
Confirm address: press and hold the «F1» and «F2» buttons simultaneously for
3 seconds until you hear the confirmation tone.
If 90 seconds elapse without you having confirmed the selected address, the monitor
will remain programmed with the last address stored before entering programming
mode.
