Page 24
iLOFT Monitor
iLOFT Monitor
iLOFT Monitor
iLOFT Monitor
(5 sec.)
(3 sec.)
F1
F2
+
000
With the monitor connected:
- Press and hold the «MENU» button for 5 seconds. The tone pre-programmed on
the main panel will sound.
- Press and hold the «F1» and «F2» buttons simultaneously for 3 seconds. The
confirmation tone will sound, the monitor screen will be activated and will show its
current address in the box.
The blue led on.
PROGRAMMING OF THE iLOFT MONITOR
as a SECONDARY
1. Select programming mode:
2. Programme the monitor’s address from the Monitor
Hundreds: Press the button
Tens: Press the button
Units: Press the button
2.1-
Press the corresponding button for hundreds, tens or units to increase the
corresponding digit by that unit (appears on screen):
Once you reach 9 pressing the
button again will return you to
0 and an error tone will sound.
The next time you press the
button it will start from the
number 1.
2.3-
Confirm address: press and hold the «F1» and «F2» buttons simultaneously for
3 seconds until you hear the confirmation tone.
If 90 seconds elapse without you having confirmed the selected address, the monitor
will remain programmed with the last address stored before entering programming
mode.
000
2.2-
Press the «F2» button until you hear the confirmation sound.
