Ferm JSM1026, Original Instructions Manual

Page: 4 / 44

4
EN
• Let the machine run at no load in a safe area
after mounting the saw blade. If the machine
vibrates strongly, immediately switch off the
machine and try to solve the problem.
• Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Holding the workpiece by
hand or against your body leaves it unstable
and may lead to loss of control.
Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs.
Use of any other battery packs may create a
risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power
tool is maintained.
For the charger
Intended use
Charge only CDA1094 type rechargeable battery
packs. Other types of batteries may burst causing
personal injury and damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
b) Children being supervised not to play with
the appliance
c) Do not recharging non-rechargeable
batteries!
d) During charging, batteries must be placed
in the well ventilated area!
Kickback
Kickback is the upward and backward
movement of the saw blade when the saw blade
unexpectedly touches an object.
Securely hold the machine during use.
Keep your attention focused on the operation.
Kickback is usually caused by:
- unintentionally touching hard objects or
materials with the rotating saw blade;
- a blunt saw blade;
- a saw blade that is not properly mounted;
- sawing into a previous cut;
- a lack of attention to the operation;
- an instable stance.
ELECTRICAL SAFETY
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use a
extension cable reel, always fully unroll the
cable.
TECHNICAL DATA
Charger CDA1139
Input of charger 100-240V~ 50/60Hz 15W
Output of charger 13,5V d.c. 400mA
Rechargeable battery 12 V Li-ion 1.5 Ah
Battery charging time 3-5 hours
No-load speed 2100 min-1
Max. sawing depth (wood) 25 mm
Max. sawing stroke 13 mm
Weight 0.89 kg