55
a) Connect a decoder with an aerial
socket to the TV
Connect the aerial cable.
b) Connect a decoder without an aerial
socket to the TV
Connect the decoder to your TV with a eurocable
(RCA Jack Cable) to
EXT.1, EXT.2
(RCA Jack).
When your decoder has a Scart / RCA Jack you
can obtain better picture quality if you connect a
eurocable (RCA Jack Cable) to
EXTERNAL
(RCA Jack).
TV and Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you also
connect a eurocable to
EXTERNAL
sockets.
Playback NTSC
Connect NTSC VCR player to the scart socket at the
back of the TV.
Connect NTSC VCR player to RCA Jack at the front
of the TV.
Then, press
AV
button to select (EXT-1,RGB, EXT-
2, EXT-2S, F-AV).
Copy Facility
Source selection for
VCR
recording.
Select Features Menu in the
MENU
.
Select
EXT-2 OUTPUT
source pressing or
button.
If you want to watch a picture on 4:3 TV that is
watched or recorded by using SCART-2 copy
function of 16:9 TV, you should set the picture
mode to 16:9.
If you want to watch a picture on 16:9 TV that is
watched or recorded by using SCART-2 copy
function of 4:3 TV, you should set the picture mode
to 4:3.
Search for and store the test signal of
the video recorder
Unplug the aerial cable from the aerial socket
ANT
of your video recorder.
Switch on your TV and put the video recorder on
the test signal. (See the handbook for your video
recorder.)
Enter the Install menu.
Search for the test signal of your video recorder in
the same way as you searched for and stored the
TV signals. See Tuning, Search and Store TV chan-
nels. Store the test signal under programme num-
ber 0.
Replace the aerial cable in the aerial socket
ANT
of your video recorder once you have stored the
test signal.
Camera and Camcorder
To connect to Front-AV input
(F-AV):
Connect your camera or camcorder at the front side
of your TV.
Connect your equipment to the TV via
VIDEO
(yellow),
AUDIO R
(red) and
AUDIO L
(white)
inputs. You should connect the jacks to the input in
the same colour.
Connecting the decoder to the video
recorder
Some video recorders have a special scart socket
for decoder.
Connect a eurocable to the scart socket of your
decoder and to the special scart socket of your
video recorder. See also the handbook of your
video recorder.
To connect your video recorder to the TV, see TV
and Video Recorder section.
If you want to connect more equipment to your TV,
consult your dealer.
Connecting Headphones
Note: To avoid damage to hearing , always take
care that the volume is turned down to low before
using headphones.
Use the stereo headphone socket (HP) on the lower
front / right side of your TV, to connect headphones.
Connecting peripheral equipment
50058935-2825W-2147 UK-IDTV TV-DVB AK45 IB-FERGUSON-FTV28DFW5-10031081.p65
22.11.2004, 18:00
55
Summary of Contents for FTV28DFW5
Page 60: ......
