background image

11

everyday  operation

There are a great many keys to use in different situations. Many of the menu

screens displayed by the TV have reminders as to which keys do what, at the

base of the screen. In addition, many screens have further help available which is

displayed when the “

INFO

” key is pressed, as prompted at the bottom right of

the screen.
Pressing the “

TV/DTV

” key at any time while watching television programmes

will switch the TV set between displaying the digital terrestrial television pro-

gramme and its normal analogue television reception.

CHANGING CHANNELS

Hint
The channel list numbers are as-

signed  by  the  broadcasters.  Be-

cause not all channels are broad-

cast free-to-air and stored by the

TV, the channel list numbers do not

run continuously.
The fifteenth channel in the list, for

example, may not be channel num-

ber 15 but channel number 17.

When you press a number key on the re-

mote control, a small box appears in the

top left of the screen to show the entered

number. After each digit is entered, the TV

will wait up to two seconds for the next

digit to be pressed until either three digits

have been entered or you do not press a

digit in time. The channel corresponding to

the entered number in the box will then be

selected.

Hint
If you enter a number which does not

correspond to a stored channel, the

next valid channel number is selected

instead.

DIGITAL  TV

You can select the channel you wish to watch in one of four ways - 1) stepping

through the channel list, 2) selection by number, 3) from the on-screen channel list,

4) using the electronic programme guide (EPG).
To move through the channel list, press the “

P+

” or “

P -

” keys on the remote con-

trol. Pressing the “

P+

” key will select the channel next in the channel list. Pressing the

“

P -

” key will select the previous channel in the list.

Pressing the “

P+

” key when the last channel in the list is being viewed will select the

first channel. Similarly, pressing the “

P -

” key when the first channel is displayed will

select the last channel in the channel list.
You can also select the required channel using its channel list number. Channel num-

bers are entered using the number keys on the remote control handset and can be

up to three digits long.

50058935-2825W-2147 UK-IDTV TV-DVB AK45 IB-FERGUSON-FTV28DFW5-10031081.p65

22.11.2004, 17:59

11

Summary of Contents for FTV28DFW5





























































Reviews: