Ferax XAGD50/9040, Manual

Page: 16 / 28

12
Fig. 2
• Check air supply is at least 60 PSI.
The gun is now ready to use.
Press the head of the gun onto work piece to
be fastened, and squeeze the trigger to fire
nail or staple.
Fig. 3
5. MAINTENANCE
• Lubricate gun by applying 2-3 drops of air
tool oil to the air intake daily.
• Keep the gun clean.
• Remove top plate covering striking pin and
clean monthly or after every 50 hours use.
• Use a water separator in compressor line to
reduce moisture contamination and possible
corrosive damage to tool.